magnesium salt uses_High Visibility Clothing Requirements

High Visibility Clothing Requirements Do you know when you or your employees need to wear high-visibility gear ? Do you know what level of protection is needed? Are you in compliance with current regulations? What is the Requirement? On November 24, 2008, a new federal regulation, 23CFR634, went into effect mandating that anyone working in the right-of-way of a federal-aid highway must wear high-visibility clothing . Part 634 states: "All workers within the right-of-way of a Federal-aid highway who are exposed either to traffic (vehicles using the highway for purposes of travel) or to construction equipment within the work area shall wear high-visibility safety apparel." But who are workers? According to Part 634 - "W orkers means people on foot whose duties place them within the right-of-way of a Federal-aid highway, such as highway construction and maintenance forces; survey crews; utility crews; responders to incidents within the highway right-of-way; firefighters and other emergency responders when they are not directly exposed to flame, fire, heat, and/or hazardous materials; and law enforcement personnel when directing traffic, investigating crashes, and handling lane closures, obstructed roadways, and disasters within the right-of-way of a Federal-aid highway." Working Factors to Consider Consider these factors when determining what type of clothing is needed: Speed and volume of traffic through workzone. Time of day - there is less visibility at night. Workzone activity - are there lots of construction vehicles and all kinds of work being done? Type of activity worker is performing - Is worker focused on task at hand or watching oncoming traffic? Proximity to traffic and other construction vehicles. High Visibility Classes What do they Mean? High Visibility Clothing must meet ANSI (American National Standards Institute) standards and comes in 3 types- class 1, class 2 or class 3 garments. Class 1 provides the least level of visibility and class 3 provides the greatest amount of fluorescent and reflective material. Hari Kalla from the Federal Highway Administration offers the following suggestions: Class 3 High Visibility Jacket OEM printing logo personalized reflective safety Vest Class 3 high visibility clothing is recommended for the following: Anyone with a high task load and works close to moving equipment or traffic at high speeds. Night workers. "Cluttered" work zones with high levels of activity. Workers with no separation between them and traffic. This might include: roadway construction personnel, utility workers, survey crews and emergency response personnel. Class 2 High Visibility Vest Class 2 high visibility clothing is recommended for the following: Flaggers (mandatory that flaggers wear class 2 garments; class 3 is suggested for night time flagging). When more visibility is needed due to bad weather. When the workzone is complex and cluttered. This might include: Forestry operations, ship cargo loading operations, roadway construction personnel, utility workers, survey crews and school crossing guards in traffic, delivery drivers, high-volume parking and/or toll gate personnel, emergency response personnel, law enforcement personnel, trash collection and recycling and accident site investigators. NOTE: Class 1 garments cannot be worn to comply with 23CFR634. Class 1 high visibility clothing is recommended for the following: Worker's attention is fully on oncoming traffic. Where there is separation between the worker and traffic. This might include: parking lot attendants, people retrieving shopping carts and some delivery drivers. High Visibility for Police and Firefighters Policemen and firefighters are required to wear high visibility clothing in certain situations. Policemen are not required to wear high visibility clothing in "adversarial or confrontational" roles. This gives them the ability to protect themselves (for example, by pulling a weapon) during traffic stops and searches. However, police officers must wear high visibility clothing when directing traffic, investigating crashes and handling lane closures. Firefighters failed to ask for any exemptions prior to the November effective date. Afterwards, they became concerned that if they wore high visibility clothing over their turnouts this might put them at added risk during a fire. Effective July 15, 2009, firefighters are exempt from wearing high-visibility apparel when exposed to hazardous conditions where the use of such apparel may increase the risk of injury to the firefighter. Whether you're a firefighter, a police officer, a construction worker, a surveyor or crossing school guard, wear high visibility apparel so you are able to be seen by road traffic. Don't be one of the 100 workers killed in a work zone every year!